Garage Door Installation in Okemos, MI

A basic single-skin steel single door installed sits at the low end, a standard insulated double door in the middle, and carriage-house or custom glass-and-aluminium doors considerably higher. Insulation R-value, steel gauge, windows and hardware drive most of the difference. Every quote we give includes removal and disposal of the old door.

If the garage is attached, has living space above it, or you use it as a workshop, yes. An insulated door with a polyurethane core makes a measurable difference to how cold the garage gets and to how much heat the adjoining rooms lose. If it is a detached, unheated garage used purely for storage, the case is much weaker.

Often yes, if the opener is reasonably modern, has working photo-eye sensors and is rated for the weight of the new door. Heavier insulated doors sometimes need a stronger unit. We check the horsepower rating and the safety features during the site measure and tell you before you order.

Nine times out of ten it is the rollers. Builder-grade steel rollers run on exposed bearings that dry out, flat-spot and then grind in the track. Swapping to sealed nylon rollers is inexpensive and makes an immediate difference. Loose hinges, a dry torsion bar and an unbalanced door also contribute.

No, and this is the one job we ask people not to attempt. Torsion springs are wound under enough tension to break bones or worse if they release unexpectedly, and the winding bars are not interchangeable with screwdrivers or rebar. It is a genuinely dangerous repair and it is priced modestly for that reason.

Pull the red release cord and try lifting the door by hand. If it is extremely heavy or won't budge, you have a broken spring and should stop there. If it lifts easily, the fault is in the opener: check the photo-eye sensors near the floor for a blinking light, obstruction or misalignment, and confirm the opener still has power. Tell us what you found and we can often diagnose it on the phone.